China Shanying CNC tools
0 Корзина$0.00

PRUDUCTS

  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
  • 1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar Shandong Denso Pricision Tools Co.,Ltd.
1 62

1020-Bore groove cutter small hole internal groove cutter grain deepening groove small bore cutter CNC cutter comma blade digging groove cutter bar

Available Offers

Supporting logo and non-standard tools customization

Consult Customer Service for more discounts & up to 99% off freight

Add WhatsApp + 8618917971898
$6.28
$6.28 $12.57
Распродажа Продано
Сумма налога включена. Стоимость доставки рассчитывается при оформлении заказа.
specification: MG-H12-18-05R [No.5 toolholder] Minimum hole diameter 9mm
In stock (1000 units), ready to be shipped
  • Daily deals
  • Return policy
  • Payment method
  • Help center 24/7
Secure checkout with
  • American Express
  • Diners Club
  • Discover
  • Maestro
  • Mastercard
  • PayPal
  • Visa

(1) Benefits: Save up to 90% on purchasing costs. Many customers save a lot of purchasing costs every month.

(2) Quality: We are OEM for many CNC tool brands. The quality of our products is recognized by many customers. 30-day refund policy for all products.

(3) Payment: Accept Paypal and credit card payments, 180-day credit guarantee.

(4) Delivery: Worldwide shipping from Chinese factory. Convenient doorstep delivery. We will handle all the tedious procedures such as customs declaration and customs clearance. All you need to do is just place an order.

(5) Co-operation: First cooperation is just the beginning. We look forward to building lasting relationships. We strive to provide best service for every customer.

(6) Order gift: Choose us, you’ll receive a gift from China Denso. Contact customer service for details.

China Shanying dedicated to being your best partner in China, saving your money. Trust us to source devices at lower prices with reduced shipping costs. We can help you with all your affairs in China, including purchasing other products, transportation, customs clearance, etc.

О товаре

Small hole inner groove turning tool bar Comma blade groove tool bar

HRC:58-62 spring steel hardened and shock-resistant small hole slotting tool shanks are tested for hardness, precision, and other tests before leaving the factory to ensure that the products are of high quality and higher precision.

1. Stronger rigidity
The shank is molded in a single pass with carburizing and quenching process to make it more rigid and abrasion resistant.
2.Wider application
Suitable for CNC machining centers, CNC machine tools, milling machines and other equipment.
3.Whole Precision Grinding
The surface of the toolholder has been ground through the whole finishing process, and is highly glossy and bright.
4. Longer life
The toolholder has been tested for tens of thousands of times and has a longer life than ordinary toolholders.
5.Overall chamfering
The corners of the knife shaft have been chamfered by fine grinding and rounded without pulling.
6. Strong anti-vibration
Strong anti-vibration of the toolholder, up to 8 times anti-vibration.
7. Tight seams are not easy to collapse the blade.
The knife shaft is heat-treated, not easy to produce physical deformation, the blade and the knife shaft are tightly closed, the blade does not chipping.
8.Overall fine grinding and chamfering treatment
The surface has been finely ground and plated, and the bottom has been chamfered, so the overall precision is higher.

Просмотреть всю информацию
Variant Variant total Количество Цена Variant total
MG-H12-18-05R [No.5 toolholder] Minimum hole diameter 9mm
MG-H12-18-05R [No.5 toolholder] Minimum hole diameter 9mm
<span class=trans-money>$6.28</span>/ea
$12.57
$0.00
<span class=trans-money>$6.28</span>/ea
$12.57
$0.00
MG-H16-20-07R
MG-H16-20-07R
<span class=trans-money>$6.71</span>/ea
$13.43
$0.00
<span class=trans-money>$6.71</span>/ea
$13.43
$0.00
MG-H16-25-07RMG-HMG-H16-25-07R 【No.7 toolholder】 Min. hole size 11.5mm
MG-H16-25-07RMG-HMG-H16-25-07R 【No.7 toolholder】 Min. hole size 11.5mm
<span class=trans-money>$6.71</span>/ea
$13.43
$0.00
<span class=trans-money>$6.71</span>/ea
$13.43
$0.00
MG-H16-25-09R 【No.9 toolholder】 Min. hole diameter 16.5mm
MG-H16-25-09R 【No.9 toolholder】 Min. hole diameter 16.5mm
<span class=trans-money>$6.85</span>/ea
$13.71
$0.00
<span class=trans-money>$6.85</span>/ea
$13.71
$0.00
MG-H16-30-09R 【No.9 toolholder】 Min. hole size 16.5
MG-H16-30-09R 【No.9 toolholder】 Min. hole size 16.5
<span class=trans-money>$6.85</span>/ea
$13.71
$0.00
<span class=trans-money>$6.85</span>/ea
$13.71
$0.00
MB05-100 【No.5 blade width 1.0】 Max. depth of cut 2.5mm
MB05-100 【No.5 blade width 1.0】 Max. depth of cut 2.5mm
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
MB05-150 【No.5 blade width 1.5】 Max. depth of cut 2.5mm
MB05-150 【No.5 blade width 1.5】 Max. depth of cut 2.5mm
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
MB05-200 【No.5 blade width 2.0】 Max. depth of cut 2.5mm
MB05-200 【No.5 blade width 2.0】 Max. depth of cut 2.5mm
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
MB07-100 【No.7 blade width 1.0】 Max. depth of cut 3.5mm
MB07-100 【No.7 blade width 1.0】 Max. depth of cut 3.5mm
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
MB07-150 【No.7 blade width 1.5】 Max. depth of cut 3.5mm
MB07-150 【No.7 blade width 1.5】 Max. depth of cut 3.5mm
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
MB07-200 [No.7 blade width 2.0] Max. depth of cut 3.5mm
MB07-200 [No.7 blade width 2.0] Max. depth of cut 3.5mm
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
MB07-250 [No.7 blade width 2.5] Max. depth of cut 3.5mm
MB07-250 [No.7 blade width 2.5] Max. depth of cut 3.5mm
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
MB07-300 [No.7 blade width 3.0] Max. depth of cut 3.5mm
MB07-300 [No.7 blade width 3.0] Max. depth of cut 3.5mm
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
MB09-100 [No.9 blade width 1.0] Maximum depth of cut 6mm
MB09-100 [No.9 blade width 1.0] Maximum depth of cut 6mm
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
MB09-150 【No.9 blade width 1.5】 Max. depth of cut 6mm
MB09-150 【No.9 blade width 1.5】 Max. depth of cut 6mm
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
MB09-200 【No.9 blade width 2.0】 Max. depth of cut 6mm
MB09-200 【No.9 blade width 2.0】 Max. depth of cut 6mm
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
MB09-250 [No.9 blade width 2.5] Max. depth of cut 6mm
MB09-250 [No.9 blade width 2.5] Max. depth of cut 6mm
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
MB09-300 【No.9 blade width 3.0】 Max. depth of cut 6mm
MB09-300 【No.9 blade width 3.0】 Max. depth of cut 6mm
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
MB09-350 【No.9 blade width 3.5】 Max. cutting depth 6mm
MB09-350 【No.9 blade width 3.5】 Max. cutting depth 6mm
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
<span class=trans-money>$2.14</span>/ea
$4.29
$0.00
[Round arc] MB07-100-R0.5 [Slot width 1] [Slot depth 3.5] Processing steel / stainless steel
[Round arc] MB07-100-R0.5 [Slot width 1] [Slot depth 3.5] Processing steel / stainless steel
<span class=trans-money>$2.85</span>/ea
$5.71
$0.00
<span class=trans-money>$2.85</span>/ea
$5.71
$0.00
[Round Arc] MB07-150-R0.75 [Slot Width 1.5] [Slot Depth 4] Processed Steel/Stainless Steel
[Round Arc] MB07-150-R0.75 [Slot Width 1.5] [Slot Depth 4] Processed Steel/Stainless Steel
<span class=trans-money>$2.85</span>/ea
$5.71
$0.00
<span class=trans-money>$2.85</span>/ea
$5.71
$0.00
[Round arc] MB07-200-R1.0 [Slot Width 2] [Slot Depth 4] Processed Steel/Stainless Steel
[Round arc] MB07-200-R1.0 [Slot Width 2] [Slot Depth 4] Processed Steel/Stainless Steel
<span class=trans-money>$2.85</span>/ea
$5.71
$0.00
<span class=trans-money>$2.85</span>/ea
$5.71
$0.00
[Round arc] MB07-250-R1.25 [Slot Width 2.5] [Slot Depth 4] Machined Steel/Stainless Steel
[Round arc] MB07-250-R1.25 [Slot Width 2.5] [Slot Depth 4] Machined Steel/Stainless Steel
<span class=trans-money>$2.85</span>/ea
$5.71
$0.00
<span class=trans-money>$2.85</span>/ea
$5.71
$0.00
[Round arc] MB09-100-R0.5 [Slot Width 1] [Slot Depth 4] Machined Steel/Stainless Steel
[Round arc] MB09-100-R0.5 [Slot Width 1] [Slot Depth 4] Machined Steel/Stainless Steel
<span class=trans-money>$2.85</span>/ea
$5.71
$0.00
<span class=trans-money>$2.85</span>/ea
$5.71
$0.00
[Round arc] MB09-150-R0.75 [Slot Width 1.5] [Slot Depth 4] Machined Steel/Stainless Steel
[Round arc] MB09-150-R0.75 [Slot Width 1.5] [Slot Depth 4] Machined Steel/Stainless Steel
<span class=trans-money>$2.85</span>/ea
$5.71
$0.00
<span class=trans-money>$2.85</span>/ea
$5.71
$0.00
[Round arc] MB09-200-R1.0 [Slot Width 2] [Slot Depth 4] Machined Steel/Stainless Steel
[Round arc] MB09-200-R1.0 [Slot Width 2] [Slot Depth 4] Machined Steel/Stainless Steel
<span class=trans-money>$2.85</span>/ea
$5.71
$0.00
<span class=trans-money>$2.85</span>/ea
$5.71
$0.00
[Round arc] MB09-250-R1.25 [Slot Width 2.5] [Slot Depth 4] Machined Steel/Stainless Steel
[Round arc] MB09-250-R1.25 [Slot Width 2.5] [Slot Depth 4] Machined Steel/Stainless Steel
<span class=trans-money>$2.85</span>/ea
$5.71
$0.00
<span class=trans-money>$2.85</span>/ea
$5.71
$0.00
Round arc] MB09-300-R1.5 [Slot width 3] [Slot depth 4] Machined steel/stainless steel
Round arc] MB09-300-R1.5 [Slot width 3] [Slot depth 4] Machined steel/stainless steel
<span class=trans-money>$2.85</span>/ea
$5.71
$0.00
<span class=trans-money>$2.85</span>/ea
$5.71
$0.00
HNGR08J07 [shallow groove] [with 7GR] Min. hole size 10mm
HNGR08J07 [shallow groove] [with 7GR] Min. hole size 10mm
<span class=trans-money>$6.43</span>/ea
$12.86
$0.00
<span class=trans-money>$6.43</span>/ea
$12.86
$0.00
HNGR08K06 【Shallow groove】【With 6GR】 Min. hole diameter 9.5mm
HNGR08K06 【Shallow groove】【With 6GR】 Min. hole diameter 9.5mm
<span class=trans-money>$6.43</span>/ea
$12.86
$0.00
<span class=trans-money>$6.43</span>/ea
$12.86
$0.00
HNGR08K07 【Shallow groove】【With 7GR】 Min. hole size 10mm
HNGR08K07 【Shallow groove】【With 7GR】 Min. hole size 10mm
<span class=trans-money>$6.43</span>/ea
$12.86
$0.00
<span class=trans-money>$6.43</span>/ea
$12.86
$0.00
HNGR10K07 【Shallow groove】【With 7GR】 Min. hole size 12mm
HNGR10K07 【Shallow groove】【With 7GR】 Min. hole size 12mm
<span class=trans-money>$7.00</span>/ea
$14.00
$0.00
<span class=trans-money>$7.00</span>/ea
$14.00
$0.00
HNGR10K08 【Shallow groove】【With 8GR】 Min. hole size 12mm
HNGR10K08 【Shallow groove】【With 8GR】 Min. hole size 12mm
<span class=trans-money>$7.00</span>/ea
$14.00
$0.00
<span class=trans-money>$7.00</span>/ea
$14.00
$0.00
HNGR12M09 【Shallow groove】 【With 9GR】 Min. hole size 16mm
HNGR12M09 【Shallow groove】 【With 9GR】 Min. hole size 16mm
<span class=trans-money>$7.71</span>/ea
$15.43
$0.00
<span class=trans-money>$7.71</span>/ea
$15.43
$0.00
D14N-SNGR09 [with 9GR] Minimum processing hole diameter 17mm
D14N-SNGR09 [with 9GR] Minimum processing hole diameter 17mm
<span class=trans-money>$7.85</span>/ea
$15.71
$0.00
<span class=trans-money>$7.85</span>/ea
$15.71
$0.00
D16Q-SNGR09 [with 9GR] Minimum hole size 19mm
D16Q-SNGR09 [with 9GR] Minimum hole size 19mm
<span class=trans-money>$7.85</span>/ea
$15.71
$0.00
<span class=trans-money>$7.85</span>/ea
$15.71
$0.00
D20R-SNGR09 [with 9GR] Minimum hole size 24mm
D20R-SNGR09 [with 9GR] Minimum hole size 24mm
<span class=trans-money>$7.85</span>/ea
$15.71
$0.00
<span class=trans-money>$7.85</span>/ea
$15.71
$0.00
6GR100 【width 1mm】【depth of cut 1.5】
6GR100 【width 1mm】【depth of cut 1.5】
<span class=trans-money>$9.28</span>/ea
$18.57
$0.00
<span class=trans-money>$9.28</span>/ea
$18.57
$0.00
6GR150【Width 1.5mm】【Cutting depth 1.5】
6GR150【Width 1.5mm】【Cutting depth 1.5】
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
Milky white 6GR200 【width 2mm】
Milky white 6GR200 【width 2mm】
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
7GR100【width 1mm】【depth of cut 1.5】
7GR100【width 1mm】【depth of cut 1.5】
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
7GR150 ([width 1.5mm] depth of cut 1.5)
7GR150 ([width 1.5mm] depth of cut 1.5)
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
White color 7GR200 【width 2mm】
White color 7GR200 【width 2mm】
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
8GR100 [Width 1mm] [Cutting depth 2】
8GR100 [Width 1mm] [Cutting depth 2】
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
8GR110 【Width 1.1mm】 【Depth of cut 2】
8GR110 【Width 1.1mm】 【Depth of cut 2】
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
8GR120 【Width 1.2mm】【Cutting depth 2】
8GR120 【Width 1.2mm】【Cutting depth 2】
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
8GR130 【width 1.3mm】【depth of cut 2】
8GR130 【width 1.3mm】【depth of cut 2】
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
8GR140 【width 1.4mm】【depth of cut 2】
8GR140 【width 1.4mm】【depth of cut 2】
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
8GR150 【width 1.5mm】【depth of cut 2】
8GR150 【width 1.5mm】【depth of cut 2】
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
8GR170 【Width 1.7mm】【Depth of cut 2】
8GR170 【Width 1.7mm】【Depth of cut 2】
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
8GR200 【width 2mm】【depth of cut 2V】
8GR200 【width 2mm】【depth of cut 2V】
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
9GR100 [Width 1mm] [Cutting depth 1.5】
9GR100 [Width 1mm] [Cutting depth 1.5】
<span class=trans-money>$1.71</span>/ea
$3.43
$0.00
<span class=trans-money>$1.71</span>/ea
$3.43
$0.00
9GR150 【width 1.5mm】【depth of cut 3】
9GR150 【width 1.5mm】【depth of cut 3】
<span class=trans-money>$1.71</span>/ea
$3.43
$0.00
<span class=trans-money>$1.71</span>/ea
$3.43
$0.00
9GR200【width 2mm】【depth of cut 3】
9GR200【width 2mm】【depth of cut 3】
<span class=trans-money>$1.71</span>/ea
$3.43
$0.00
<span class=trans-money>$1.71</span>/ea
$3.43
$0.00
9GR210【width 2.1mm】【depth of cut 3】
9GR210【width 2.1mm】【depth of cut 3】
<span class=trans-money>$1.71</span>/ea
$3.43
$0.00
<span class=trans-money>$1.71</span>/ea
$3.43
$0.00
9GR250【width 2.5mm】【depth of cut 3】
9GR250【width 2.5mm】【depth of cut 3】
<span class=trans-money>$1.71</span>/ea
$3.43
$0.00
<span class=trans-money>$1.71</span>/ea
$3.43
$0.00
9GR280 【width 2.8mm】【depth of cut 3】
9GR280 【width 2.8mm】【depth of cut 3】
<span class=trans-money>$1.71</span>/ea
$3.43
$0.00
<span class=trans-money>$1.71</span>/ea
$3.43
$0.00
9GR290【Width 2.9mm】【Depth of cut 3】
9GR290【Width 2.9mm】【Depth of cut 3】
<span class=trans-money>$1.71</span>/ea
$3.43
$0.00
<span class=trans-money>$1.71</span>/ea
$3.43
$0.00
9GR300 [ width 3mm ] [ depth of cut 3】
9GR300 [ width 3mm ] [ depth of cut 3】
<span class=trans-money>$1.71</span>/ea
$3.43
$0.00
<span class=trans-money>$1.71</span>/ea
$3.43
$0.00
7GR200（【width 2mm】 【depth of cut 1.5】
7GR200（【width 2mm】 【depth of cut 1.5】
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
6GR200 【width 2mm】 【depth of cut 1.5】
6GR200 【width 2mm】 【depth of cut 1.5】
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
<span class=trans-money>$1.57</span>/ea
$3.14
$0.00
Please consult for more specifications
Please consult for more specifications
<span class=trans-money>$499.50</span>/ea
$999.00
$0.00
<span class=trans-money>$499.50</span>/ea
$999.00
$0.00
View cart
0

Total items

$0.00

Product subtotal

Налоги включены. Стоимость доставки рассчитывается при оформлении заказа.
View cart

Got Questions?

If you’d like to learn more about us and our products, contact us!

Contact info

WhatsApp:

+86 18917971898

Follow us

You might like